Daily Papers

The Greenland ice sheet is melting at an accelerated rate due to processes that are not fully understood and hard to measure. The distribution of surface meltwater can help understand these processes and is observable through remote sensing, but current maps of meltwater face a trade-off: They are either high-resolution in time or space, but not both. We develop a deep learning model that creates gridded surface meltwater maps at daily 100m resolution by fusing data streams from remote sensing observations and physics-based models. In particular, we spatiotemporally downscale regional climate model (RCM) outputs using synthetic aperture radar (SAR), passive microwave (PMW), and a digital elevation model (DEM) over the Helheim Glacier in Eastern Greenland from 2017-2023. Using SAR-derived meltwater as "ground truth", we show that a deep learning-based method that fuses all data streams is over 10 percentage points more accurate over our study area than existing non deep learning-based approaches that only rely on a regional climate model (83% vs. 95% Acc.) or passive microwave observations (72% vs. 95% Acc.). Alternatively, creating a gridded product through a running window calculation with SAR data underestimates extreme melt events, but also achieves notable accuracy (90%) and does not rely on deep learning. We evaluate standard deep learning methods (UNet and DeepLabv3+), and publish our spatiotemporally aligned dataset as a benchmark, MeltwaterBench, for intercomparisons with more complex data-driven downscaling methods. The code and data are available at github.com/blutjens/hrmelt.

Synthetic Aperture Radar (SAR) imagery is the primary data type used for sea ice mapping due to its spatio-temporal coverage and the ability to detect sea ice independent of cloud and lighting conditions. Automatic sea ice detection using SAR imagery remains problematic due to the presence of ambiguous signal and noise within the image. Conversely, ice and water are easily distinguishable using multispectral imagery (MSI), but in the polar regions the ocean's surface is often occluded by cloud or the sun may not appear above the horizon for many months. To address some of these limitations, this paper proposes a new tool trained using concurrent multispectral Visible and SAR imagery for sea Ice Detection (ViSual\_IceD). ViSual\_IceD is a convolution neural network (CNN) that builds on the classic U-Net architecture by containing two parallel encoder stages, enabling the fusion and concatenation of MSI and SAR imagery containing different spatial resolutions. The performance of ViSual\_IceD is compared with U-Net models trained using concatenated MSI and SAR imagery as well as models trained exclusively on MSI or SAR imagery. ViSual\_IceD outperforms the other networks, with a F1 score 1.60\% points higher than the next best network, and results indicate that ViSual\_IceD is selective in the image type it uses during image segmentation. Outputs from ViSual\_IceD are compared to sea ice concentration products derived from the AMSR2 Passive Microwave (PMW) sensor. Results highlight how ViSual\_IceD is a useful tool to use in conjunction with PMW data, particularly in coastal regions. As the spatial-temporal coverage of MSI and SAR imagery continues to increase, ViSual\_IceD provides a new opportunity for robust, accurate sea ice coverage detection in polar regions.

The Integrated Multi-Satellite Retrievals for the Global Precipitation Measurement (IMERG) product combines precipitation estimates from passive microwave (PMW) and infrared (IR) sensors to provide quasi-global precipitation estimates at half-hourly resolution. Because IR observations are primarily sensitive to cloud-top properties, however, IR-based precipitation estimates are generally less accurate than PMW estimates and can introduce artifacts into the merged precipitation fields. We introduce GPROF-IR, a neural-network-based precipitation retrieval designed to provide precipitation estimates from single-channel geostationary IR observations for the upcoming IMERG V08. GPROF-IR uses a convolutional neural network to exploit spatiotemporal information from sequences of half-hourly IR observations. We validate GPROF-IR against independent surface-based precipitation measurements over land and ocean. GPROF-IR substantially improves upon existing single-channel IR retrievals, including the IR retrieval used in IMERG V07 and more recent neural-network-based approaches. During overpasses of flagship PMW sensors, GPROF-IR is more accurate than the corresponding IMERG PMW estimates over CONUS and Austria, but not Korea. Over CONUS, GPROF-IR outperforms the merged IMERG V07 product for hourly and daily precipitation accumulations. Against shipborne disdrometer observations, GPROF-IR is more accurate than IMERG V07 in the tropics but slightly less accurate in the extratropics. Since geostationary IR observations are continuously available across much of the globe since 1983, GPROF-IR provides a promising basis for improving merged precipitation products and developing long-term, temporally consistent precipitation records.

Passive space-borne radiometers operating in the 1400-1427 MHz protected frequency band face radio frequency interference (RFI) from terrestrial sources. With the growth of wireless devices and the appearance of new technologies, the possibility of sharing this spectrum with other technologies would introduce more RFI to these radiometers. This band could be an ideal mid-band frequency for 5G and Beyond, as it offers high capacity and good coverage. Current RFI detection and mitigation techniques at SMAP (Soil Moisture Active Passive) depend on correctly detecting and discarding or filtering the contaminated data leading to the loss of valuable information, especially in severe RFI cases. In this paper, we propose an autoencoder-based RFI mitigation method to remove the dominant RFI caused by potential coexistent terrestrial users (i.e., 5G base station) from the received contaminated signal at the passive receiver side, potentially preserving valuable information and preventing the contaminated data from being discarded.

Quantum microwave transmission is key to realizing modular superconducting quantum computers and distributed quantum networks. A large number of incoherent photons are thermally generated within the microwave frequency spectrum. The closeness of the transmitted quantum state to the source-generated quantum state at the input of the transmission link (measured by the transmission fidelity) degrades due to the presence of the incoherent photons. Hence, high-fidelity quantum microwave transmission has long been considered to be infeasible without refrigeration [3,4]. In this study, we propose a novel method for high-fidelity quantum microwave transmission using a room-temperature lossy waveguide. The proposed scheme consists of connecting two cryogenic nodes (i.e., a transmitter and a receiver) by the room-temperature lossy microwave waveguide. First, cryogenic preamplification is implemented prior to transmission. Second, at the receiver side, a cryogenic loop antenna is placed inside the output port of the waveguide and coupled to an LC harmonic oscillator located outside the waveguide. The loop antenna converts quantum microwave fields (which contain both signal and noise photons) to a quantum voltage across the coupled LC harmonic oscillator. The loop antenna detector at the receiver is designed to extensively suppress the induced photons across the LC oscillator. The signal transmittance is maintained intact by providing significant preamplification gain. Our calculations show that high-fidelity quantum transmission (i.e., more than 95%) is realized based on the proposed scheme for transmission distances reaching 100 m.

This study investigates the possibility of increasing the radiation efficiency of printed antennas and arrays by suppressing their inherent surface waves using a metasurface made of quad-split rings (QSR). A symmetrical resonant microstrip dipole and a four-element series-fed dipole array printed on an infinite grounded dielectric layer (layer thickness: 0.2 mm; relative permittivity: 9.4; tan delta: 0.0005) were simulated with FEKO 2022 software. Conducted at 100-116 GHz, the numerical results revealed extremely low radiation efficiencies of approximately 31% and 40% for the studied dipole and dipole array, respectively, which resulted from the presence of surface waves in the dielectric. However, placing only one QSR near each dipole arm triggered an increase in radiation efficiency by 2.5 times (up to 75%). The use of a metasurface in the form of two small QSR arrays triggered a pronounced improvement in radiation efficiency, reaching 93.6% and 96.5% for the studied dipole and dipole array, respectively. Analysis of the electric field distribution images showed that this enhancement resulted from surface wave suppression.

A cylindrical TM_{0,1,0} mode microwave cavity resonator was excited using a balanced interferometric configuration that allowed manipulation of the electric field and potential within the resonator by adjusting the phase and amplitude of the interferometer arms driving the resonator. With precise tuning of the phase and amplitude, 25 dB suppression of the electric field at the resonance frequency was achieved while simultaneously resonantly enhancing the time-varying electric-scalar potential. Under these conditions, the system demonstrated electromagnetically induced absorption in the cavity response due to the annulment of the electric field at the resonance frequency. This phenomena can be regarded as a form of extreme dispersion, and led to a sharp increase in the cavity phase versus frequency response by an order of magnitude when compared to the cavity Q-factor. This work presents an experimental setup that will allow the electric-scalar Aharonov-Bohm effect to be tested under conditions involving a time-varying electric-scalar potential, without the presence of an electric field or magnetic vector potential, an experiment that has not yet been realised.

The forthcoming era of massive drone delivery deployment in urban environments raises a need to develop reliable control and monitoring systems. While active solutions, i.e., wireless sharing of a real-time location between air traffic participants and control units, are of use, developing additional security layers is appealing. Among various surveillance systems, radars offer distinct advantages by operating effectively in harsh weather conditions and providing high-resolution reliable detection over extended ranges. However, contrary to traditional airborne targets, small drones and copters pose a significant problem for radar systems due to their relatively small radar cross-sections. Here, we propose an efficient approach to label drones by attaching passive resonant scatterers to their rotor blades. While blades themselves generate micro-Doppler rotor-specific signatures, those are typically hard to capture at large distances owing to small signal-to-noise ratios in radar echoes. Furthermore, drones from the same vendor are indistinguishable by their micro-Doppler signatures. Here we demonstrate that equipping the blades with multiple resonant scatterers not only extends the drone detection range but also assigns it a unique micro-Doppler encoded identifier. By extrapolating the results of our laboratory and outdoor experiments to real high-grade radar surveillance systems, we estimate that the clear-sky identification range for a small drone is approximately 3-5 kilometers, whereas it would be barely detectable at 1000 meters if not labeled. This performance places the proposed passive system on par with its active counterparts, offering the clear benefits of reliability and resistance to jamming.

The Q/U Imaging ExperimenT (QUIET) employs coherent receivers at 43GHz and 95GHz, operating on the Chajnantor plateau in the Atacama Desert in Chile, to measure the anisotropy in the polarization of the CMB. QUIET primarily targets the B modes from primordial gravitational waves. The combination of these frequencies gives sensitivity to foreground contributions from diffuse Galactic synchrotron radiation. Between 2008 October and 2010 December, >10,000hours of data were collected, first with the 19-element 43GHz array (3458hours) and then with the 90-element 95GHz array. Each array observes the same four fields, selected for low foregrounds, together covering ~1000deg^2. This paper reports initial results from the 43GHz receiver which has an array sensitivity to CMB fluctuations of 69uK sqrt(s). The data were extensively studied with a large suite of null tests before the power spectra, determined with two independent pipelines, were examined. Analysis choices, including data selection, were modified until the null tests passed. Cross correlating maps with different telescope pointings is used to eliminate a bias. This paper reports the EE, BB and EB power spectra in the multipole range ell=25-475. With the exception of the lowest multipole bin for one of the fields, where a polarized foreground, consistent with Galactic synchrotron radiation, is detected with 3sigma significance, the E-mode spectrum is consistent with the LCDM model, confirming the only previous detection of the first acoustic peak. The B-mode spectrum is consistent with zero, leading to a measurement of the tensor-to-scalar ratio of r=0.35+1.06-0.87. The combination of a new time-stream double-demodulation technique, Mizuguchi-Dragone optics, natural sky rotation, and frequent boresight rotation leads to the lowest level of systematic contamination in the B-mode power so far reported, below the level of r=0.1

Superconducting travelling-wave parametric amplifiers (TWPAs) provide broadband gain, low added noise, and high dynamic range, making them attractive for applications requiring wide instantaneous bandwidth. This is crucial for amplifying multiplexed narrow band signals spread over a wide frequency range, such as qubit resonator arrays, or amplifying inherently wide band signals, such as in spectrometers or radiometers. In many cases, however, the useful bandwidth of a TWPA is limited by the production of the idler tone at an image frequency. For three-wave-mixing (3WM) TWPAs, for example, an input signal at f_s is indistinguishable from one at f_p - f_s, which can produce spectral ambiguity when the input spectrum is broadband or not known in advance. We experimentally demonstrate a balanced architecture that doubles the instantaneous image-rejected bandwidth available to a 3WM TWPA by spatially separating the amplified signal from the output pump and generated idler, which resolves the sideband degeneracy. The architecture consists of two amplifiers connected between a pair of 180^{circ} hybrid couplers, with the signal and pump injected and output through the sum and difference ports, respectively. Using two kinetic-inductance TWPAs, we demonstrate approximately 20 dB of signal gain across nearly an octave of bandwidth, together with pump rejection below --20 dB and an average image rejection of approximately --15 dB over the operating band. These results establish balanced TWPAs as a practical approach to broadband parametric amplification, enabling improved contamination free bandwidth and eliminating the need for complex filtering.

We present a 380-520 GHz balanced superconductor-insulator-superconductor (SIS) mixer on a single silicon substrate. All radio-frequency (RF) circuit components are fabricated on a 9 μm thick membrane. The intermediate frequency (IF) is separately amplified and combined. The balanced mixer chip, using Nb/Al/Al_{2}O_{3}/Nb SIS junctions, is mounted in a tellurium copper waveguide block at 4.2 K using Au beam lead contacts. We find uncorrected minimum receiver double-sideband noise temperatures of 70 K and a noise suppression of up to 18 dB, measured within a 440-495 GHz RF and a 4-8 GHz IF bandwidth, representing state-of-the-art device performance.

Passive galaxies are ubiquitous in the local universe, and various physical channels have been proposed that lead to this passivity. To date, robust passive galaxy candidates have been detected up to z leqslant 5, but it is still unknown if they exist at higher redshifts, what their relative abundances are, and what causes them to stop forming stars. We present predictions from the First Light And Reionisation Epoch Simulations (FLARES), a series of zoom simulations of a range of overdensities using the EAGLE code. Passive galaxies occur naturally in the EAGLE model at high redshift, and are in good agreement with number density estimates from HST and early JWST results at 3 leqslant z leqslant 5. Due to the unique FLARES approach, we extend these predictions to higher redshifts, finding passive galaxy populations up to z sim 8. Feedback from supermassive black holes is the main driver of passivity, leading to reduced gas fractions and star forming gas reservoirs. We find that passive galaxies at z geqslant 5 are not identified in the typical UVJ selection space due to their still relatively young stellar populations, and present new rest--frame selection regions. We also present NIRCam and MIRI fluxes, and find that significant numbers of passive galaxies at z geqslant 5 should be detectable in upcoming wide surveys with JWST. Finally, we present JWST colour distributions, with new selection regions in the observer--frame for identifying these early passive populations.

Inverse design of RF passive components from S-parameters is a high-dimensional, ill-posed problem, and prior generative approaches are limited to single-layer binary-metallization structures. This paper presents an inverse design approach that generates passive components from partial S-parameter inputs on an 8times8 mm board discretized at 64times64 pixels with sub-pixel grayscale metallization across 1-20 GHz. The framework generates two-layer copper layouts with vias, with hard physical constraints on feed locations enforced through annealed Langevin projection, flexible multi-modal conditioning on partial S-parameter specifications, port locations, dielectric properties, reference topology, and variable port placement. Candidate designs are generated in seconds, with surrogate-predicted S-parameters matching targets to within 0.77 pm 1.28 dB weighted mean absolute error. We validate the approach with two fabricated designs on RO4003C: a manufacturable alternative to a hairpin filter whose coupling gaps violate fabrication rules, and a combline bandpass filter designed from scratch given only target S-parameters.

We present a single-ended to balanced modified ladder-lattice filter topology, realized with periodically polarized piezoelectric (P3F) AlScN resonators, for single-ended to differential filtering applications. This filter topology eliminates the need for baluns or other passive components and can interface, for instance, directly between differential antennas and single-ended power and low noise amplifiers. Two filter designs operating at 19 GHz were implemented. The first design exhibited a minimum insertion loss of 1.3 dB, a 6.26% fractional 3-dB bandwidth, an average out-of-band rejection of 30 dB and occupied a 348 um x 476 um footprint, while the second higher-selectivity filter achieved 1.58 dB of minimum insertion loss, 5.11% fractional 3-dB bandwidth, 33 dB of average out-of-band rejection, and occupied a 392 um x 476 um footprint - Making them highly competitive for wireless communications filters. The working principle of the modified ladder-lattice topology is discussed, the design of the filters are presented, and the linearity of the filters is explored through intermodulation and power handling measurements.

We model and study the processes of excitation, absorption, and transfer in various networks. The model consists of a harmonic oscillator representing a single-mode radiation field, a qubit acting as an antenna, a network through which the excitation propagates, and a qubit at the end serving as a sink. We investigate how off-resonant excitations can be optimally absorbed and transmitted through the network. Three strategies are considered: optimising network energies, adjusting the couplings between the radiation field, the antenna, and the network, or introducing and optimising driving fields at the start and end of the network. These strategies are tested on three different types of network with increasing complexity: nearest-neighbour and star configurations, and one associated with the Fenna-Matthews-Olson complex. The results show that, among the various strategies, the introduction of driving fields is the most effective, leading to a significant increase in the probability of reaching the sink in a given time. This result remains stable across networks of varying dimensionalities and types, and the driving process requires only a few parameters to be effective.

An experimental demonstration of directivities exceeding the fundamental Kildal limit, a phenomenon called superdirectivity, is provided for spherical high-index dielectric antennas with an electric dipole excitation. A directivity factor of about 10 with a total efficiency of more than 80\% for an antenna having a size of a third of the wavelength was measured. High directivities are shown to be associated with constructive interference of particular electric and magnetic modes of an open spherical resonator. Both analytic solution for a point dipole and a full-wave rigorous simulation for a realistic dipole antenna were employed for optimization and analysis, yielding an excellent agreement between experimentally measured and numerically predicted directivities. The use of high-index low-loss ceramics can significantly reduce the physical size of such antennas while maintaining their overall high radiation efficiency. Such antennas can be attractive for various high-frequency applications, such as antennas for the Internet of things, smart city systems, 5G network systems, and others. The demonstrated concept can be scaled in frequency.

Tellegen medium has long been a topic of debate, with its existence being contested over several decades. It was first proposed by Tellegen in 1948 and is characterized by a real-valued cross coupling between electric and magnetic responses, distinguishing it from the well-known chiral medium that has imaginary coupling coefficients. Significantly, Tellegen responses are closely linked to axion dynamics, an extensively studied subject in condensed matter physics. Here, we report the realization of Tellegen metamaterials in the microwave region through a judicious combination of subwavelength metallic resonators, gyromagnetic materials, and permanent magnet discs. We observe the key signature of the Tellegen response, i.e. a Kerr rotation for reflected wave, while the polarization remains the same in the transmission direction. The retrieved effective Tellegen parameter is several orders of magnitude greater than that of natural materials. Our work opens door to a variety of nonreciprocal photonic devices and may provide a platform for studying axion physics.

Edge magnetoplasmons (EMPs) provide a platform for probing chiral charge dynamics and nonreciprocal microwave transport in topological quantum materials. However, detecting small perturbations to EMP propagation remains challenging because their signatures in conventional microwave scattering measurements can be weak. Here, we investigate microwave-photon-induced perturbations of EMP transport using a quantum anomalous Hall topological circulator. Pump--probe measurements reveal a strongly frequency-selective response: while microwave irradiation substantially modifies the EMP transmission at several pump frequencies, the transmission remains nearly unchanged at selected frequencies, including 4 and 7 GHz. We further exploit the non-Hermitian mode hybridization of the coupled EMP-resonator system to probe the response near an exceptional point (EP). The pump-induced change in transmission magnitude near the EP is approximately twice that observed away from the EP, demonstrating an enhanced microwave response to perturbations. These results reveal the interplay among chiral EMP transport, microwave-photon-induced perturbations, and non-Hermitian dynamics, and demonstrate the potential of topological circulators as a promising platform for enhanced microwave spectroscopy and sensing.

Artificial transmission lines built with lumped-element inductors and capacitors form the backbone of broadband, nearly quantum-limited traveling-wave parametric amplifiers (TWPAs). However, systematic design methods for TWPAs, and more generally artificial transmission lines, are lacking. Here, I develop a general synthesis framework for lossless artificial transmission lines by borrowing from periodic structure theory and passive network synthesis. These complementary approaches divide the design space: periodic loading synthesis employs spatial modulation of frequency-independent components, while filter synthesis employs frequency-dependent responses in spatially-uniform components. When tailoring transmission lines for parametric processes, nonlinear elements are added, typically nonlinear inductances in superconducting circuits, while ensuring energy and momentum conservation between interacting tones. Applying this framework, I design a kinetic inductance TWPA with a novel phase-matching architecture, and a backward-pumped Josephson TWPA exploiting an ambidextrous i.e., right-left-handed transmission line.

Suppressing parasitic back-reflection caused by imperfections, such as random defects, material inhomogeneities, localized inclusions, and fabrication-induced geometric deviations, has long been a central objective in optical-waveguide engineering. In this Letter, we theoretically establish that universal immunity to backscattering from arbitrary disorder is fundamentally impossible in reciprocal optical waveguides, irrespective of whether the underlying structure is topologically trivial or nontrivial.We establish this result through two complementary constructions of physically admissible reciprocal perturbations. The first considers weak permittivity perturbations of finite spatial extent within the first Born approximation, whereas the second considers optically small dielectric perturbations of finite contrast. In each construction, an admissible realization exists that produces a nonzero leading-order backward-scattering amplitude. We trace the fundamental origin of this limitation to the absence in photons of the intrinsic spin-1{2} and fermionic time-reversal structure underlying Kramers protection in electronic systems. Consequently, any mechanism that enforces photonic backscattering suppression throughout a prescribed class of disorder must instead be engineered into the underlying electromagnetic structure and its constitutive response, which can itself be modified by generic reciprocal perturbations. Numerical examples in representative reciprocal topological waveguides further illustrate these limitations for random defects and sharp bends. We further identify several constructive strategies for suppressing back-reflection within certain prescribed classes of disorder.

Detection of undersea threats is a complex problem of considerable importance for maritime regional surveillance and security. Multistatic sonar systems can provide a means to monitor for underwater threats, where fixed sensors, towed arrays and dipping sonars may be utilised for this purpose. However, it is advantageous to deploy passive sensors to provide a stealthy early warning system. Hence this paper is concerned with determining where a series of passive sonar sensors should be situated in order to provide an initial threat detection capability. In order to facilitate this it is necessary to derive a suitable expression for the probability of threat detection from a passive sensor. This is based upon considerations of the passive sonar equation. It will be demonstrated how the stochastic aspects of this equation may be modelled through appropriate random variables capturing the uncertainty in noise levels. Subsequently this is utilised to produce the system-level probability of threat detection. Since the threat location is also unknown an appropriate statistical model is introduced to account for this uncertainty. This then permits the specification of the probability of detection as a function of sensor locations. Consequently it is then possible to determine optimal sensor placement to maximise the threat detection probability. This provides a new way in which to determine whether a surveillance region is covered adequately by sensors. The methodology will be illustrated through a series of examples utilising passive sonar characteristics sourced from the open literature.

High-accuracy microwave sensing is widely demanded in various fields, ranging from cosmology to microwave quantum technology. Quantum receivers based on inorganic solid-state spin systems are promising candidates for such purpose because of the stability and compatibility, but their best sensitivity is currently limited to a few pT/rm{Hz}. Here, by utilising an enhanced readout scheme with the state-of-the-art solid-state maser technology, we develop a robust microwave quantum receiver functioned by organic molecular spins at ambient conditions. Owing to the maser amplification, the sensitivity of the receiver achieves 6.14 pm 0.17 fT/rm{Hz} which exceeds three orders of magnitude than that of the inorganic solid-state quantum receivers. The heterodyne detection without additional local oscillators improves bandwidth of the receiver and allows frequency detection. The scheme can be extended to other solid-state spin systems without complicated control pulses and thus enables practical applications such as electron spin resonance spectroscopy, dark matter searches, and astronomical observations.

The Q/U Imaging ExperimenT (QUIET) has observed the cosmic microwave background (CMB) at 43 and 95GHz. The 43-GHz results have been published in QUIET Collaboration et al. (2011), and here we report the measurement of CMB polarization power spectra using the 95-GHz data. This data set comprises 5337 hours of observations recorded by an array of 84 polarized coherent receivers with a total array sensitivity of 87 uK sqrt(s). Four low-foreground fields were observed, covering a total of ~1000 square degrees with an effective angular resolution of 12.8', allowing for constraints on primordial gravitational waves and high-signal-to-noise measurements of the E-modes across three acoustic peaks. The data reduction was performed using two independent analysis pipelines, one based on a pseudo-Cl (PCL) cross-correlation approach, and the other on a maximum-likelihood (ML) approach. All data selection criteria and filters were modified until a predefined set of null tests had been satisfied before inspecting any non-null power spectrum. The results derived by the two pipelines are in good agreement. We characterize the EE, EB and BB power spectra between l=25 and 975 and find that the EE spectrum is consistent with LCDM, while the BB power spectrum is consistent with zero. Based on these measurements, we constrain the tensor-to-scalar ratio to r=1.1+0.9-0.8 (r<2.8 at 95% C.L.) as derived by the ML pipeline, and r=1.2+0.9-0.8 (r<2.7 at 95% C.L.) as derived by the PCL pipeline. In one of the fields, we find a correlation with the dust component of the Planck Sky Model, though the corresponding excess power is small compared to statistical errors. Finally, we derive limits on all known systematic errors, and demonstrate that these correspond to a tensor-to-scalar ratio smaller than r=0.01, the lowest level yet reported in the literature.

Integrated sensing and communication (ISAC) has been recognized as one of the key technologies capable of simultaneously improving communication and sensing services in future wireless networks. Moreover, the introduction of recently developed movable antennas (MAs) has the potential to further increase the performance gains of ISAC systems. Achieving these gains can pose a significant challenge for MA-enabled ISAC systems operating in the near-field due to the corresponding spherical wave propagation. Motivated by this, in this paper we maximize the weighted sum rate (WSR) for communication users while maintaining a minimal sensing requirement in an MA-enabled near-field ISAC system. To achieve this goal, we propose an algorithm that optimizes the sensing receive combiner, the communication precoding matrices, the sensing transmit beamformer and the positions of the users' MAs in an alternating manner. Simulation results show that using MAs in near-field ISAC systems provides a substantial performance advantage compared to near-field ISAC systems with only fixed antennas. Additionally, we demonstrate that the highest WSR is obtained when larger weights are allocated to the users placed closer to the BS, and that the sensing performance is significantly more affected by the minimum sensing signal-to-interference-plus-noise ratio (SINR) threshold compared to the communication performance.

Dielectric materials, with high tunability at microwave frequencies, are key components in the design of microwave communication systems. Dense Ba0.6Sr0.4TiO3 (BST) ceramics, with different grain sizes, were prepared in order to optimise the dielectric tunability via polar nano cluster effects. Dielectric permittivity and loss measurements were carried at both high and low frequencies and were supported by results from X-ray powder diffraction, scanning and transmission electron microscopies, Raman spectroscopy and piezoresponse force microscopy. The concentration of polar nano clusters, whose sizes are found to be in the range 20 to 50 nm, and the dielectric tunability increase with increasing grain size. A novel method for measurement of the microwave tunability in bulk dielectrics is presented. The highest tunability of 32% is achieved in ceramics with an average grain size of 10 um. The tunability of BST ceramics with applied DC field is demonstrated in a prototype small resonant antenna.

Although Maxwell discovered the physical laws of electromagnetic waves 160 years ago, how to precisely model the propagation of an RF signal in an electrically large and complex environment remains a long-standing problem. The difficulty is in the complex interactions between the RF signal and the obstacles (e.g., reflection, diffraction, etc.). Inspired by the great success of using a neural network to describe the optical field in computer vision, we propose a neural radio-frequency radiance field, NeRF^2, which represents a continuous volumetric scene function that makes sense of an RF signal's propagation. Particularly, after training with a few signal measurements, NeRF^2 can tell how/what signal is received at any position when it knows the position of a transmitter. As a physical-layer neural network, NeRF^2 can take advantage of the learned statistic model plus the physical model of ray tracing to generate a synthetic dataset that meets the training demands of application-layer artificial neural networks (ANNs). Thus, we can boost the performance of ANNs by the proposed turbo-learning, which mixes the true and synthetic datasets to intensify the training. Our experiment results show that turbo-learning can enhance performance with an approximate 50% increase. We also demonstrate the power of NeRF^2 in the field of indoor localization and 5G MIMO.

We consider funnel control for linear infinite-dimensional systems that are impedance passive, meaning that they satisfy an energy balance in which the stored energy equals the squared norm of the state and the supplied power is the inner product of input and output. For the analysis we employ the system node approach, which offers a unified framework for infinite-dimensional systems with boundary and distributed control and observation. The resulting closed-loop dynamics are governed by a nonlinear evolution equation; we establish its solvability and hence the applicability of funnel control to this class. The applicability is illustrated by an Euler-Bernoulli beam, which is studied in two distinct scenarios: once with boundary control and once with distributed control.

Integrated sensing and communication (ISAC) is a novel capability expected for sixth generation (6G) cellular networks. To that end, several challenges must be addressed to enable both mono- and bistatic sensing in existing deployments. A common impairment in both architectures is oscillator phase noise (PN), which not only degrades communication performance, but also severely impairs radar sensing. To enable a broader understanding of orthogonal-frequency division multiplexing (OFDM)-based sensing impaired by PN, this article presents an analysis of sensing peformance in OFDM-based ISAC for different waveform parameter choices and settings in both mono- and bistatic architectures. In this context, the distortion of the adopted digital constellation modulation is analyzed and the resulting PN-induced effects in range-Doppler radar images are investigated both without and with PN compensation. These effects include peak power loss of target reflections and higher sidelobe levels, especially in the Doppler shift direction. In the conducted analysis, these effects are measured by the peak power loss ratio, peak-to-sidelobe level ratio, and integrated sidelobe level ratio parameters, the two latter being evaluated in both range and Doppler shift directions. In addition, the signal-to-interference ratio is analyzed to allow not only quantifying the distortion of a target reflection, but also measuring the interference floor level in a radar image. The achieved results allow to quantify not only the PN-induced impairments to a single target, but also how the induced degradation may impair the sensing performance of OFDM-based ISAC systems in multi-target scenarios.

The transition of an impulsively excited kink oscillation of a solar coronal loop to an oscillation with a stationary amplitude, i.e., the damping pattern, is determined using the low-dimensional self-oscillation model. In the model, the decayless kink oscillations are sustained by the interaction of the oscillating loop with an external quasi-steady flow. The analytical solution is based on the assumption that the combined effect of the effective dissipation, for example, by resonant absorption, and interaction with an external flow, is weak. The effect is characterised by a dimensionless coupling parameter. The damping pattern is found to depend upon the initial amplitude and the coupling parameter. The approximate expression shows a good agreement with a numerical solution of the self-oscillation equation. The plausibility of the established damping pattern is demonstrated by an observational example. Notably, the damping pattern is not exponential, and the characteristic decay time is different from the time determined by the traditionally used exponential damping fit. Implications of this finding for seismology of the solar coronal plasmas are discussed. In particular, it is suggested that a very rapid, in less than the oscillation period, decay of the oscillation to the stationary level, achieved for larger values of the coupling parameter, can explain the relative rareness of the kink oscillation events.

Pinching-antenna systems attach dielectric pinches to a waveguide, creating line-of-sight radiation points within a few meters of any user. The pinches on one waveguide, however, radiate the same signal, unlike a conventional array, where each element transmits a dedicated signal. Separating the signals of multiple users therefore becomes challenging and requires a new perspective on multiple access. Most existing studies rest on an idealized model, and no survey examines the access schemes under realistic impairments. This article surveys multiple access in pinching-antenna systems and organizes fifty-six works into a unified taxonomy by spatial degrees of freedom. The users of one waveguide can be separated only in time, frequency, power, or guided mode, while multiple waveguides add the space domain. The article then identifies the impairments critical to this separation, which perturb the effective channel, leak interference across orthogonal resources, or couple the pinches on the uplink, and summarizes them in an impairment-versus-method map. A unified evaluation of time-, frequency-, power-, and space-domain access under identical channel and impairment models reveals that the degradation is method specific. The analytical and numerical results give insight into multiple access in these systems and provide a basis for its impairment-aware design, a necessary step toward their adoption in practical networks.

Outdoor-to-indoor (OtI) signal propagation further challenges the already tight link budgets at millimeter-wave (mmWave). To gain insight into OtI mmWave scenarios at 28 GHz, we conducted an extensive measurement campaign consisting of over 2,200 link measurements. In total, 43 OtI scenarios were measured in West Harlem, New York City, covering seven highly diverse buildings. The measured OtI path gain can vary by up to 40 dB for a given link distance, and the empirical path gain model for all data shows an average of 30 dB excess loss over free space at distances beyond 50 m, with an RMS fitting error of 11.7 dB. The type of glass is found to be the single dominant feature for OtI loss, with 20 dB observed difference between empirical path gain models for scenarios with low-loss and high-loss glass. The presence of scaffolding, tree foliage, or elevated subway tracks, as well as difference in floor height are each found to have an impact between 5-10 dB. We show that for urban buildings with high-loss glass, OtI coverage can support 500 Mbps for 90% of indoor user equipment (UEs) with a base station (BS) antenna placed up to 49 m away. For buildings with low-loss glass, such as our case study covering multiple classrooms of a public school, data rates over 2.5/1.2 Gbps are possible from a BS 68/175 m away from the school building, when a line-of-sight path is available. We expect these results to be useful for the deployment of mmWave networks in dense urban environments as well as the development of relevant scheduling and beam management algorithms.